DJI Mavic 3 Multispectral
Multispectral + RGB imaging system
The highly integrated imaging system
Sunlight Sensor
The built-in sunlight sensor captures solar irradiance and records it in an image file, allowing for light compensation of image data during 2D reconstruction. This results in more accurate NDVI results, as well as improved accuracy and consistency of data acquired over time.
RTK module
Accurate images that capture every pixel
Mavic 3M with RTK module for centimeter-level positioning. Flight control, the camera, and the RTK module sync in microseconds to accurately capture the location of each camera's imaging center. This enables Mavic 3M to do high-precision aerial surveying without using ground control points.
Efficient and reliable battery life
Ultra-long battery life, fast bursts of 43 minutes*, Cruise time 200 hectares**. A single flight can complete mapping operations over an area of 200 hectares.
Stable signal, smooth image transmission
The O3 transmission integrates two transmitting signals and four receiving signals to support 15km ultra-long transmission distances.
Omnidirectional obstacle sensing, terrain-follow aerial surveying
The aircraft features multiple wide-FOV vision sensors that accurately detect obstacles in all directions for omnidirectional obstacle avoidance. The terrain-follow aerial surveying can be easily performed in steep-slope landscapes.
*Specific test conditions: In a sunny environment without wind, the orthographic flight aerial photography is obtained with a flight speed of 15 m/s, a flight altitude of 217 m, a ground sampling distance (GSD) of 5.73 cm for visible and 10 cm for multispectral, a fore-and-aft overlap rate of 70%, and a side overlap rate of 60%.
**Data was measured using a DJI Mavic 3M flying at a constant speed of 36 kph at sea level in a windless environment until 0% power remaining. It is for reference only. Please pay attention to Return to Home prompts on the DJI Pilot 2 app during the flight.
DJI Mavic 3 Multispectral - In The Box
- DJI Mavic 3M Aircraft with RTK Module & SD Card x1
- Remote Controller x1
- Propeller Pair x3
- Battery x1
- Charger x1
- Carrying Case x1
- USB-C to USB-C Cable x 1
- Power Cable x1
- USB-C Cable x1
- Screwdriver x1
- Manuals
DJI Care Enterprise Basic (Mavic 3M)
DJI Care Refresh is a comprehensive and reliable protection plan that provides DJI products [1] with coverage for a range of accidental damages and natural wear.
DJI Care Refresh | 1-Year Plan | 2-Year Plan |
---|---|---|
Service Period | 1 year | 2 years |
Number of Replacements | 2 (including 1 for Flyaway Coverage) | 3 (including 2 for Flyaway Coverage) |
Extended Service [3] | N/A | Extend to 24 months |
Maintenance Services (for select products) | 1 | 2 |
Discounted Repair (for select products) [4] | 2 (15% off) | 3 (15% off) |
DJI Care Refresh + | Supported | Not available |
Service Process
When you need to replace your device, DJI Care Express (data analysis and replacement for flyaway cases are currently not supported) sends the replacement product back to you faster. For other scenarios, you can request service.